Electron Microscopy Studio · Get started
The window
Applies to Electron Microscopy Studio 2.1 and later
One window per file. The sidebar lists five workspaces, one for each kind of data.
Workspaces
The sidebar on the left lists the workspaces, top to bottom. Each has a shortcut. A workspace with more than one part lists its parts below it.
| Workspace | Key | Parts | What you do there |
|---|---|---|---|
| Imaging | ⌘1 | Image, FFT | TEM and SEM images and their Fourier transform |
| Diffraction | ⌘2 | Camera length, d-spacings, indexing and zone axis | |
| EBSD | ⌘3 | Patterns, Indexing, Maps | EBSD and TKD: patterns, indexing and orientation maps |
| Spectroscopy | ⌘4 | EDS, EELS | EDS and EELS spectra and spectrum images |
| Results | ⌘5 | Review and export the numbers |
The file decides what is available. A workspace or a part with no data for the open file is dimmed, and says why when you point at it; see Troubleshooting. Going back to a workspace returns to the part you left it in.
The picture and the inspector
The middle of the window shows the data: the image, the pattern, the map or the spectrum. The inspector on the right holds the settings and the results of the part you are in. Show or hide it with ⌥⌘I.
Output
Output, below the picture, is the log: every step the app ran, with its numbers and any warning. Show or hide it with ⌃⌘L. Read it after each step.
Running a step
Most results update while you work. A step that goes through a whole scan, such as indexing, runs when you ask for it.
| Command | Key |
|---|---|
| Workspace › run the current step (the menu names it) | ⌘R |
| Workspace › Stop | ⌘. |
More shortcuts
| Command | Key |
|---|---|
| File › New Window | ⌘N |
| File › Open Image… | ⌘O |
| File › Reopen Last Session | ⇧⌘O |
| File › Close (the image, dataset, map or spectrum image shown) | ⌘W |
| File › Close Window | ⇧⌘W |
| File › Export Image… | ⇧⌘E |
| File › Export Transform… | ⌥⌘E |
| File › Export Results… | ⌥⇧⌘E |
| Image › Pan, Distance, Angle, Profile | ⌃⌘1 to ⌃⌘4 |
| Show or hide the sidebar | ⌃⌘S |
In the EDS part, ⌃⌘0 to ⌃⌘4 choose the region tools instead: select, rectangle, ellipse, polygon and line.
Settings
Settings… in the app menu (⌘,) has three parts: Images, Agents and Software Update.