Electron Microscopy Studio · Get started
First look
Applies to Electron Microscopy Studio 2.1 and later
From the welcome screen to a measured distance and a Fourier transform in a few minutes, with the demo data that comes with the app. No download needed.
Open a demo
- Open Electron Microscopy Studio. The welcome screen offers Open Image… and Try Demo Data.
- Click Try Demo Data and choose Lattice Image.
The image opens in the Imaging workspace. The Calibration section of the inspector on the right shows the pixel size and where it came from.
Measure a distance
- Choose the Distance tool in the Measure section of the inspector, or press ⌃⌘2.
- Drag across the feature you want to measure, for example over ten lattice fringes.
The fringes of the demo image are 0.235 nm apart, so ten of them measure 2.35 nm. The measurement appears in the Measure section, in the unit of the image and in pixels. The Angle tool (⌃⌘3) and the Profile tool (⌃⌘4) work the same way; Pan (⌃⌘1) moves the picture again.
Look at the Fourier transform
- Under Imaging in the sidebar, choose FFT.
- The window shows the image and its Fourier transform side by side. Drag on the image to draw a square region and transform only that part.
- In the Spots section of the inspector, click Find Spots. The spots are ringed and listed.
A lattice image gives sharp spots in its transform, one pair for each set of fringes. The further out a spot lies, the finer the spacing it stands for.
Save the picture
Choose File › Export Image… (⇧⌘E).
Try the other demos
Try Demo Data, also under Help › Open Demo Data, has one document for every part of the app. Each opens where it belongs:
| Demo | Opens in |
|---|---|
| Lattice Image | Imaging › Image |
| SEM Image (generated) | Imaging › Image |
| Au Diffraction Pattern | Diffraction |
| Ni EBSD Patterns (kikuchipy) | EBSD › Patterns |
| Duplex Steel Orientation Map (orix) | EBSD › Maps |
| EDX Spectrum Image | Spectroscopy › EDS |
| SEM-EDS Spectrum (BAM TM002) | Spectroscopy › EDS |
| EELS Spectrum Image | Spectroscopy › EELS |
The lattice image, the diffraction pattern, the SEM image and the two spectrum images are generated. The nickel patterns, the orientation map and the SEM-EDS spectrum are public data; Example data names their sources.
Next
- Open your own file with Open Image… (⌘O). The file decides where it opens: an image in Imaging, a spectrum image in Spectroscopy, an EBSD scan in EBSD.
- The window explains where everything is.