Electron Microscopy Studio · Reference
EBSD Maps
Applies to Electron Microscopy Studio 2.1 and later
Maps shows an orientation map and what follows from it: phases, grains, misorientation and texture. This page lists every control of the part, which is in the EBSD workspace.
Maps opens an .ang or .ctf map, an .h5oina file saved without patterns, an .h5 file of orix, or an EBSD pattern file that carries a map. It also shows a run of Indexing.
Maps
| Control | What it does |
|---|---|
| Source | Which result the map shows: a map file, the indexing the pattern file holds, or the run of the Indexing part |
| Map | What the map draws: the IPF colours along a sample axis, the phases, a property of the file, or a derived map |
| Derived map | Unit |
|---|---|
| KAM, the kernel average misorientation | ° |
| GOS, the grain orientation spread | ° |
| GND, the density of geometrically necessary dislocations | log₁₀ m⁻² |
| Grains | |
| Schmid factor |
Phases
The phases of the map with their colours. A phase without a known point group has no IPF colours: its points are black.
Export
| Button | What it writes |
|---|---|
| Map PNG… | The map on screen as a figure: whole pixels per point, a scale bar, and the colour key or the phase legend beside it |
| Grains CSV… | The grain table: size, equivalent diameter, mean orientation, GOS, neighbours and the largest Schmid factor of each grain |
| Histogram CSV… | The distribution of the Histogram tab (KAM, GOS or grain size): the edges and the count of each bin |
| Texture PNG… | The pole figures, the IPF-Z density and the ODF sections of the texture phase as one figure, each with its colour bar |
Method
Orientations, symmetry and IPF colours as in orix 0.15.0. The functions and their tolerances are listed in the parity notes.